 Space system¬¬ – ¬Man-System Integration Standards – (ISO) Posted on 2009/07/28
|
Working group:ISO TC20 SC14 WG6
Document number:NWI 650
Scope :
Space Vehicles and Modules Crew Habitation Environments. This standard establishes specifications on spacecraft air quality including harmful che..... |
| For more information, click here |
Space System - Simulation Requirements for Control System (ISO) Posted on 2009/07/28
|
Working group:ISO TC20 SC14 WG4
Document number:NWI 654
Scope :
The basic principles specificated for simulation, such as the framework of the system, documents and data requirements, software and hardware req..... |
| For more information, click here |
Space Systems - End of life passivation of un-manned spacecraft (ISO) Posted on 2009/05/25
|
Working group:ISO TC20 SC14 WG3
Document number:NWI 623
Scope :
This specification defines the requirements for the passivation of spacecraft at the end of their operational life. The aim is to remove all sour..... |
| For more information, click here |
Space Systems - Disposal of satellites operating in or crossing Low Earth Orbit (ISO) Posted on 2009/05/25
|
Working group:ISO TC20 SC14 WG3
Document number:NWI N 621
Scope :
This standard focuses on disposal of satellites operating in, or crossing, Low Earth Orbit. Disposal of launch vehicle segments operating in, ..... |
| For more information, click here |
Proton (3-10MeV) fluence estimation at GEO for solar panel degradation (ISO) Posted on 2009/05/12
|
Working group:ISO TC20/SC14 WG3
Document number: ISO CDC 12208
Scope :
This Technical Specification(TS) describes a method to estimate energetic proton fluences at GEO for the long range (over the 11 year sol..... |
| For more information, click here |
Survivability of unmanned spacecraft against space debris and meteoroid impacts — Assessment procedure (ISO) Posted on 2009/05/12
|
Working group:ISO TC20 SC14 WG3
Document number:NWI 619
Scope :
This proposed project defines an assessment procedure to determine the survivability of a spacecraft against space
debris and meteoroid imp..... |
| For more information, click here |
Space systems - Measurements of thermo-optical properties of thermal control materials (ISO) Posted on 2009/02/16
|
Working group:ISO TC20 SC14 WG6
Document number:NWI N617
Scope :
This Standard describes the methodology, instruments, equipment and samples, used to calculate the thermo-optical properties of thermal-control ..... |
| For more information, click here |
Realtime solar activity and space environment information for spacecraft operation (ISO) Posted on 2009/02/16
|
Working group:ISO TC20 SC14 WG4
Document number:NWI N615
Scope :
This project is dedicated to establish the standard which describes real-time information on space environment and solar activity for spacecraf..... |
| For more information, click here |
Space systems - Orbit Lifetime Estimation (ISO) Posted on 2009/02/16
|
Working group:ISO TC20 SC14 WG 3
Document number:ISO 27852
Scope :
This standard describes a process for the estimation of orbit lifetime for space objects and associated debris in
LEO-crossing orbits.
<..... |
| For more information, click here |
Process Based Implementation of Meteoroid and Debris Environmental Models (Orbital Altitudes Below GEO+2000km) (ISO) Posted on 2008/11/25
|
Working group:ISO TC20SC14 WG4
Document number:NWI N612
Scope :
Specification and acceptance criteria (including review process for applications of models) for utilization of meteoroid and debris environmental..... |
| For more information, click here |
Space system-Launch pad and integration site-Analysis of failures (ISO) Posted on 2008/11/25
|
Working group:ISO TC20 SC14 WG3
Document number:NWI N610
Scope :
This standard establishes typical process of the analysis of causes of failure of products by manufacture, tests and operation, also probable up..... |
| For more information, click here |
Avoiding Collisions with Orbiting Objects (ISO) Posted on 2008/11/25
|
Working group:ISO TC 20 SC14 WG3
Document number:NWI N608
Scope :
This project will provide techniques that can be used to estimate the probability of collision of two orbiting space objects and will provide g..... |
| For more information, click here |
EN 9100 (IAQG) Posted on 2008/11/25
|
Working group: GT 111
Document number: EN 9100 version 2008
Scope :This new version takes into account the new standard ISO 9001 published in 2008.
Project Launching Date: IAQG 2008
..... |
| For more information, click here |
Space systems - Small auxiliary spacecraft (SASC) to launch vehicle interface control document (ISO) Posted on 2008/09/30
|
Working group:ISO TC20 SC14 WG2
Document number:26869
Scope :
The purpose of this standard is to provide Small-Auxiliary-spacecraft (SASC) and launch vehicle(LV)
organizations with the general format for..... |
| For more information, click here |
Regulations Amending the Canadian Aviation Regulations (Parts I and VI — ELT) (Canadian Department of Transport) Posted on 2008/09/22
|
Issue:
The COSPAS-SARSAT Council1 decided in 2000 to stop monitoring distress signals transmitted by Emergency
Locator Transmitters (ELTs) on the frequencies of 121.5 MHz and 243 MHz as of February 1, 2009, because of inherent l..... |
| For more information, click here |
Project breakdown structures (ISO) Posted on 2008/08/20
|
Working group:ISO TC20 SC14 WG 5
Document number:ISO 27026
Scope :
This international standard provides processes, requirements and recommendations for project breakdown
structures in terms of the variou..... |
| For more information, click here |
New Work Proposal (DIN) Posted on 2008/08/19
|
Working group: DIN AA 20.04
Document number: 8 documents, DIN 65308, DIN 65480, DIN 65507, DIN 65508, DIN 65188, DIN 29638-2, DIN 65462, DIN 9264-2.
Scope : En application de la directive 98/34/CE, qui prévo..... |
| For more information, click here |
Space systems - Space solar panels - Spacecraft charging induced electrostatic discharge test methods (ISO) Posted on 2008/08/1
|
Working group:ISO TC20 SC14 WG1
Document number:ISO CDV 11221
Scope :
This standard provides qualification and characterization test methods to simulate plasma interactions and
electrostatic discharges o..... |
| For more information, click here |
Space systems - Structural components and assemblies (ISO) Posted on 2008/08/1
|
Working group:ISO TC20 SC14 WG1
Document number:ISO 10786
Scope :
This document will establish a general standard for the design, analysis, material selection and
characterization, fabrication, test, and inspec..... |
| For more information, click here |
Space systems - Bellows - Design and operation (ISO) Posted on 2008/08/1
|
Working group:ISO TC20 SC14 WG1
Document number: ISO 10785
Scope :
This International Standard, specifies general and detailed requirements for bellows used in space systems. It
establishes requirements ..... |
| For more information, click here |
Weldability and brazeability of materials – Part 005 : Homogeneous assemblies heat resisting Ni or Co base alloys (BNAE) Posted on 2008/07/16
|
Working group:WG 429
Document number:prEN 4632-005
Scope :This standard defines degrees of weldability and brazeability for materials or families of materials used in the aerospace industry.
It comprises a ser..... |
| For more information, click here |
Aerospace series Welded and brazed assemblies for aerospace constructions – Weldability and brazeability of materials (BNAE) Posted on 2008/07/11Updated on 2008/07/16
|
Working group: WG 429
Document number:prEN 4632-003
Scope :
This standard defines degrees of weldability and brazeability for materials or families of materials used in the aerospace industry.
It compris..... |
| For more information, click here |
Weldability and brazeability of materials (BNAE) Posted on 2008/07/15
|
Working group: WG 429
Document number:prEN 4632-004
Scope :
This standard specifies the weldabiliy and brazeability of materials or material families used in the aerospace industry.
It comprises a series..... |
| For more information, click here |
Welded and brazed assemblies for aerospace constructions — (BNAE) Posted on 2008/07/11
|
Working group: WG 429
Document number: Project 8.4301.001
Scope :
This standard defines the rules to be satisfied to ensure the quality of joints of metallic materials by electron beam welding (code 51 accordi..... |
| For more information, click here |
Joints of metallic materials by laser beam welding (BNAE) Posted on 2008/07/11Updated on 2008/07/11
|
Working group:WG 429
Document number: Europeanization of NFL 06-395
Scope :
A new quality aerospace standard with up-to-date european welding normative standards.
This standard defines the rules to be observed to ensu..... |
| For more information, click here |
Elctron beam welding machine (BNAE) Posted on 2008/07/11
|
Working group: WG 429
Document number: Europeanization of NFL 06-388
Scope :
This standard defines methods for the qualification of electron beam welding machines in the aerospace industry : qualification of m..... |
| For more information, click here |
Conception en mécatronique (UNM) Posted on 2007/07/10Updated on 2008/07/8
|
Working group:UNM 03 "Mécanique générale"
Document number:
Scope :UNM souhaite engager des travaux sur le thème de la mécatronique dans le but de proposer un vocabulaire normalisé et de décrire les principales métho..... |
| For more information, click here |
STANDARDIZATION OF INCH SWIVEL FLANGE COUPLING (ASD) Posted on 2008/07/8
|
Working group: GT 346 (ASD STAN D3S3
Document number: NWI 8.3209
Scope :4 standards for the swivel flange, 4 standards for welding coupling or plug, 3 standards for design and installation.
Proje..... |
| For more information, click here |
Aluminium pigmented coatings - Technical specification (BNAE) Posted on 2008/07/7Updated on 2008/07/7
|
Working group: GT351
Document number:EN 4473 and a new TR
Projet prEN 4473 - Série aérospatiale - Revêtements alumino-organiques - Spécification technique / Aerospace series - Aluminium pigmented coatings - Technical specificatio..... |
| For more information, click here |
nserts, MJ threads, self-locking, with self-broaching keys (BNAE) Posted on 2008/07/7Updated on 2008/07/7
|
Working group:GT 351 (ASD-STAN D3S2)
Document number: 12 standards will be studied fir series inch and metric
Scope :
Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys, série métrique et..... |
| For more information, click here |
Tests Filters (ISO) Posted on 2006/10/13Updated on 2008/07/7
|
Working group:ISO/TC20/SC10/WG 8
Document number: ISO/WD 10.52.15
Scope :propositions to draft new ISO standards on filter test methods for hydraulic fluids.(on e.g. filter test dusts, relation between filtration efficiency and r..... |
| For more information, click here |
Circulation aérienne des aéronefs ultra-légers motorisés (Belgium - Service Public Fédéral Mobilité) Posted on 2008/07/2
|
| Arrêté royal modifiant l’arrêté royal du 25 mai 1999 fixant les conditions particulières imposées pour l'admission a la circulation aérienne des aéronefs ultra-légers motorisés..... |
| For more information, click here |
Basic Requirements & Tests for Electronic & Electrical Test & Measurement Equipment Part 3: Contractor Requirements - Air Use Application (UK Defence Standardization (DStan) ) Posted on 2008/07/2Updated on 2008/07/2
|
Working group: UK Defence Standardization (DStan)
Document number: DStan 004 [D/DStan/66/31/3]
Scope :
Part 3 defines requirements specific to Air Service TME procurement. The environments in which equipment..... |
| For more information, click here |
Paints for Military aircraft (French MoD) Posted on 2008/07/2
|
Working group:CIN peintures et Vernis
Document number: NORMDEF 0004
Scope :
Peintures destinées à la protection des cellules d’aéronefs militaires
Publication Date: end of 2008..... |
| For more information, click here |
Quality management systems- Aviation, Space and Defense - Quality management system audits (IAQG) Posted on 2008/06/30
|
Working group:
IAQG Working group
Document number: EN 9101
Scope :
This standard has been revised to incorporate the 2008 changes to IAQG 9100-series standard quality
management system requirements and re..... |
| For more information, click here |
Swedish Civil Aviation Authority regulations and general recommendations on the operation of an approved airport (Swedish Civil Aviation Authority) Posted on 2008/06/18
|
Scope
1 - These regulations shall be applied by airport operators for operation of airports that have been approved according to the regulations of the Swedish Civil Aviation Authority.
General
2 - Anyone who has a..... |
| For more information, click here |
Probabilistic Risk Assessment (PRA) (ISO) Posted on 2008/04/2
|
Working group:ISO TC20 SC14 WG5
Document number: ISO CDC 11231
Scope :
This standard supports and complements the implementation of the risk management process defined
in ISO 17666 in situations when app..... |
| For more information, click here |
Directive 2008/95/E - Radio interface IR-94 for very low-power transmitters for audio applications in the 87.5-108 MHz frequency band. (EC) Posted on 2008/03/14
|
Products Concerned :
Products or services that make use of the frequency bands indicated in the radio interface.
Main Content:
The interface document contains information and requirements for the granting of licences and the use of very..... |
| For more information, click here |
Directive 2008/96/E : Radio interface IR-97 for digital equipment for the land mobile service in the 446 MHz frequency band. (EC) Posted on 2008/03/14
|
Products Concerned:
Products or services that make use of the frequency bands indicated in the radio interface.
Main Content:
The interface document contains information and requirements for the granting of licences and the use o..... |
| For more information, click here |
Reference Number : 2008/97/E - Radio interface IR-96 for radio frequency identification (RFID) devices in the 865-868 MHz frequency band. (EC) Posted on 2008/03/14
|
Products Concerned:
Radio frequency identification devices that make use of the frequency bands indicated in the radio interface.
Main Content:
The interface document contains information and requirements for the granting ..... |
| For more information, click here |
EC Mandate M/408 - Interoperability of the European Air Traffic Management Network (EATMN) (EC) Posted on 2008/02/22
|
| In May 2007, the European Commission, DG Transport and Energy, forwarded to CEN, CENELEC and ETSI a ‘mandate for the development of European Standards (first part of second set of Community Specifications) for the interoperability of the European Air Traf..... |
| For more information, click here |
Space environment (natural and artificial) - Earth atmosphere density above 120km (ISO) Posted on 2008/02/14
|
Working group:ISO TC20 SC14 WG4
Document number:NWI 551
Scope :
The proposed project will describe Earth atmosphere density above 120 km for use in space system engineering design and scientific research. It w..... |
| For more information, click here |
Proton fluence estimation at GEO for solar panel degradation (ISO) Posted on 2007/12/6Updated on 2008/02/14
|
Working group: ISO TC20 SC14 WG4
Document number:NWI 532
Scope :
The objective of this standard is to outline a procedure for calculating solar panel degradation due to energetic protons include solar energeti..... |
| For more information, click here |
Regulation concerning helicopter decks on mobile offshore units (EC) Posted on 2007/11/23
|
Laid down by the Norwegian Maritime Directorate.
These regulation applies to all units which have been registered or will be registered in a Norwegian register of ships. The regulation is applicable when a helideck is fitted to a mobile offshore uni..... |
| For more information, click here |
AAutomatic Dependent Surveillance- Broadcast (ADS–B) Out Performance Requirements To Support Air Traffic Control (ATC) Service (FAA) Posted on 2007/10/31
|
This notice proposes performance requirements for certain avionics equipment on aircraft operating in specified classes of airspace within the United States National Airspace System. The proposed rule would facilitate the use of Automatic Dependent..... |
| For more information, click here |
Fabric sheet and tape prepreg from glas fibres and non-reactive thermoplastics – (DIN) Posted on 2007/10/31
|
Working group:
NA 131-02-01 AA
Document number: DIN 65671
Scope :
Aerospace – Fabric sheet and tape prepreg from glas fibres and non-reactive thermoplastics –
Technical specification
Project ..... |
| For more information, click here |
Specification for shuttle woven cotton webbing for aerospace purposes (BSI) Posted on 2007/07/4
|
Working group:ACE/65/-/39 Textiles for Aerospace Purpose
Document number:BS 6F 49
Scope :This dcument specifies the requirements for shuttle woven cotton webbing in a range of widths for aerospace purposes.
..... |
| For more information, click here |
Specification for shuttleless woven cotton webbing for aerospace purposes (BSI) Posted on 2007/07/4
|
Working group: ACE/65/-/39: Textiles for Aerospace Purpose
Document number:BS 2F 151
Scope : The document specifies the requirements for shuttleless woven cotton webbing in a range of widths for aerospace purposes.
..... |
| For more information, click here |
Spacecraft and launch vehicle flight environment telemetry data processing (ISO) Posted on 2007/05/10
|
Working group:ISO TC20 SC14 WG3
Document number:ISO CDV 15862
Scope :
This International Standard provides basic requirements for the measurement of the SC flight environments
generated by the LV, teleme..... |
| For more information, click here |
Oxygen safety - Part 6: Facility planning and implementation (ISO) Posted on 2007/05/10
|
Working group:ISO TC20 SC14 WG6
Document number:ISO CDC 22538-6
Scope :
This International Standard describes a process for the protection and safety of personnel and equipment
associated with oxygen sys..... |
| For more information, click here |
Oxygen safety - Part 5: Operational and emergency procedures (ISO) Posted on 2007/05/10
|
Working group:ISO TC20 SC14 WG 6
Document number:ISO CDC 22538-5
Scope :
This International Standard provides a set of ground and emergency procedures for safely storing, handling, and
transferring liqui..... |
| For more information, click here |
Programme management - Nonconformation control system (ISO) Posted on 2007/05/10
|
Working group:ISO TC20 SC14 WG5
Document number:ISO CDV 23461
Scope :
This Standard defines the control system for nonconformances related to any product, including EEE
components nonconformances, softwa..... |
| For more information, click here |
General test requirements for launch vehicles (ISO) Posted on 2007/05/10
|
Working group:ISO TC20 SC14 WG2
Document number:ISO 24917
Scope :
The given Standard establishes general test requirements for LPRE-equipped launch vehicles launched from
stationary ground-, sea- and air..... |
| For more information, click here |
Spacecraft Reactant Gauging (ISO) Posted on 2007/05/10
|
Working group:ISO TC20/SC14 WG 3
Document number:NWI 499
Scope :
This standard prescribes the approach to determining reactants remaining on a spacecraft so that spacecraft developers and operators can estimat..... |
| For more information, click here |
Orbit Determination and Estimation (ISO) Posted on 2007/05/10
|
Working group: ISO TC20/SC 14 WG3
Document number:NWI 497
Scope :
This specification prescribes the manner in which satellite owners/operators describe techniques used to determine orbits from active and passi..... |
| For more information, click here |
Airworthiness Standards: Engine Control System Requirements (FAA) Posted on 2007/04/25
|
Scope:
The Federal Aviation Administration (FAA) is proposing to
revise type certification standards for aircraft engine control systems. These proposed changes reflect current
practices and harmonize FAA standards with those recently ad..... |
| For more information, click here |
The Swedish Civil Aviation Authority’s administrative provisions on special requirements for the aeronautical information service (AIS) (Swedish Civil Aviation Authority) Posted on 2007/04/10
|
Scope :
The Swedish Civil Aviation Authority lays down the following on the basis of Section 74 of the Air Traffic Regulation (1986:171).
These administrative provisions shall apply in connection with the provision of an aeronautical informati..... |
| For more information, click here |
The Swedish Civil Aviation Authority’s regulations concerning special provisions for Communication, Navigation and Surveillance (CNS) services (Swedish Civil Aviation Authority) Posted on 2007/04/10
|
Scope :
The Swedish Civil Aviation Authority, by virtue of sections 65, 67 and 74 of the Aviation Order (1986:171), lays down the following.
These regulations shall be applied when Communication, Navigation and Surveillance services (CNS servi..... |
| For more information, click here |
The Swedish Civil Aviation Authority’s administrative provisions on special requirements for the aeronautical meteorological service (MET) (Swedish Civil Aviation Authority) Posted on 2007/04/10
|
Scope :
These administrative provisions shall be applied when an aeronautical meteorological service is provided within the airspace for which Sweden is responsible. ..... |
| For more information, click here |
The Swedish Civil Aviation Authority’s regulations concerning special provisions for Air Traffic Flow Management (ATFM) (Swedish Civil Aviation Authority) Posted on 2007/04/10Updated on 2007/04/10
|
Scope :
These regulations shall be applied when air traffic flow management (ATFM) is to be carried out within airspace for which Sweden is responsible...... |
| For more information, click here |
The Swedish Civil Aviation Authority’s administrative provisions on the design and use of airspace (Swedish Civil Aviation Authority) Posted on 2007/04/10
|
Scope:
These administrative provisions shall be applied within the airspace for which Sweden is responsible by the party who:
1.flies an aircraft,
2.provides an air traffic service or airspace management,
3.wishes to request a cha..... |
| For more information, click here |
RoHS (EC) Posted on 2007/03/26
|
Waste Electrical and Electronic Equipment
Scope :
Directives 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment and 2002/96/EC on waste electrical and electronic equipment are..... |
| For more information, click here |
REACH (EC) Posted on 2007/03/21
|
Scope :
The REACH Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 and Directive 2006/121/EC of the European Parliament and of the Council of 18 December 2006 amending Council Directive 67/..... |
| For more information, click here |
SEINE Project (GIFAS) Posted on 2007/03/2
|
Working group:
SEINE Project
Scope :
The objective of S.E.I.N.E .is to accelerate the digitizing of the aerospace & defence supply chain and industrial partner channels through the implementation of open and interoperable sol..... |
| For more information, click here |
Systems modellisation (BNAE) Posted on 2007/02/28Updated on 2007/02/28
|
Working group: WG006
Document number: -
Scope :
The purpose is to define or select a graphical representation mode for systems and their components and to promote it so that it becomes widely adopted by the stakeholders of..... |
| For more information, click here |
BoostAero (GIFAS) Posted on 2007/02/28
|
Working group:
BoostAero Association
Documents:
The BoostAero standards are available for Aerospace & Defence companies who want to exchange commercial documents with their trading partners, and for A&D suppliers who are i..... |
| For more information, click here |
Systems interoperability (BNAE) Posted on 2007/02/27
|
Working group:
WG006-1 : Systems interoperability
Document number:
-
Scope :
The systems designed and realized by the industry, in particular for use within the aeronautical, space and defense context, will more..... |
| For more information, click here |
Reflection group (BNAE) Posted on 2007/02/27
|
Working group:
RFID Refection group
Document number:
-
Scope :
One of the priorities of this group will be to define the RFID standardization policy in the aerospace field
Project Launching Date:
<..... |
| For more information, click here |
Space Systems – Space Solar Panels – Spacecraft Charging Induced Electrostatic Discharge Test Methods (ISO NWI490) (ISO) Posted on 2007/02/27
|
Working group:ISO TC20/SC14 WG1
Document number:NWI 490
Scope :
This standard provides qualification and characterization test methods for plasma interaction and electrostatic discharge on space solar array pa..... |
| For more information, click here |
Space Environment (natural and artificial) - Guide to Reference and Standard Atmosphere Models (ISO NWI 488) (ISO) Posted on 2007/02/27
|
Working group:ISO TC20/SC14 WG4
Document number:NWI 488
Scope :
The proposed project will provide guidelines for selected reference and standard atmospheric models for use in engineering desigh or scientific r..... |
| For more information, click here |
Test procedure to evaluate spacecraft material ejecta upon hypervelocity impact (ISO NWI 486) (ISO) Posted on 2007/02/27
|
Working group:ISO TC20/SC14 WG6
Document number:N486
Scope :
This Standard defines the requirements for testing upon hypervelocity impact of materials to be used on external surface of space hardware. This S..... |
| For more information, click here |
Subsystems/units to spacecraft interface control document (ISO NWI 484) (ISO) Posted on 2007/02/27
|
Working group:ISO TC20/SC14 WG2
Document number:NWI 484
Scope :
The purpose of this standard is to provide spacecraft organizations with the general format for the interface control documents provided from sub..... |
| For more information, click here |
Requirements for manufacturing and procurement of threaded fasteners (ISO NWI 476) (ISO) Posted on 2007/02/27
|
Working group:ISO TC20/SC14 WG6
Document number:NWI 476
Scope :
This Standard defines the minimum requirements for manufacturing, provision, inspection and quality control of high-quality threaded fastening de..... |
| For more information, click here |
Standard methods for mechanical testing of metallic materials (ISO NWI 474) (ISO) Posted on 2007/02/27
|
Working group: ISO TC20/SC14 WG6
Document number: NWI 474
Scope :
This Standard defines the requirements for mechanical testing of metallic materials to be used in the fabrication of space hardware. This Stand..... |
| For more information, click here |
Probabilistic Risk Assessment (ISO) Posted on 2007/02/27Updated on 2007/02/27
|
Working group: ISO TC20/SC14/WG5
Document number: NWI 468
Scope :
The standard defines the process of performing a probabilistic risk assessment (PRA) for an space system or programme. It covers the main steps of the proces..... |
| For more information, click here |
Requirements for manufacturing and procurement of threaded fasteners (ISO) Posted on 2007/01/30
|
Working group: ISO TC20/SC14/WG6
Document number:NWI N476
Scope :
This Standard defines the minimum requirements for manufacturing, provision, inspection and quality control of high-quality threaded fastening ..... |
| For more information, click here |
Standard methods for mechanical testing of metallic materials (ISO) Posted on 2007/01/30
|
Working group:ISO TC20/SC14/WG6
Document number:NWI N474
Scope :
This Standard defines the requirements for mechanical testing of metallic materials to be used in the fabrication of space hardware. This Standa..... |
| For more information, click here |
General test documentation (ISO CDV 17566) (ISO) Posted on 2006/09/22Updated on 2006/12/7
|
Working group:ISO TC20/SC14/WG2 GT575
Document number: ISO CDV 17566
Scope:
This standard is focused on the definition of the format for test plans, test specifications, test procedures and test reports. The scope of this standard..... |
| For more information, click here |
Early operations - Part 1: Initialization and commissioning - Part 2: Initialization plan - Part 3: Commissioning report (ISO NWI 428) (ISO) Posted on 2006/10/6Updated on 2006/12/7
|
Working group:ISO TC20/SC14 WG2 GT575
Document number: NWI 428
Scope:
The purpose of this standard is to identify plan documentation for transition of a spacecraft from the mode identified in the launch ICD to a pre-determined spa..... |
| For more information, click here |
Risk management organisation (AMRAE) Posted on 2006/12/6
|
Working group:Risk management organisation
Document number:
Scope :
- Intern organisation + the total analysis approach of the risk + the interactions between RM / quality assurance / intern audit
|
| For more information, click here |
Space data links – Telecommand protocols,synchronization and channel coding (ECSS E-50-04A Draft 1.13) (ECSS) Posted on 2006/11/22
|
Working group: ISO TC20 SC14 WG3
Document number:ECSS E-50-04A Draft 1.13
Scope :
This Standard specifies data structures and protocols for a telecommand space data link and also specifies the physical layer o..... |
| For more information, click here |
Space data links – Telemetry transfer frame (ECSS-E-50-03 Draft 1.8.1) (ECSS) Posted on 2006/11/22
|
Working group:ISO TC20 SC14 WG3
Document number:ECSS-E-50-03 Draft 1.8.1
Scope :
This Standard contains the definition for Telemetry Transfer Frames. The frames are fixed-length data structures, suitable for t..... |
| For more information, click here |
Disposal of satellites operating at geosynchronous (ISO CDC 26872) (ISO) Posted on 2006/11/2
|
Working group: ISO TC20/SC14/WG3 GT578
Document number: ISO CDC 26872
Scope :
End-of-mission disposal of an Earth-orbiting satellite broadly means
a) removing the satellite from the region of space where..... |
| For more information, click here |
Flywheel module design and testing (ISO CDV 21648) (ISO) Posted on 2006/11/2
|
Working group: ISO TC20/SC14/WG1 GT574
Document number: ISO CDV 21648
Scope :
This International Standard establishes the design, analysis, material selection and characterization,
fabrication, test and ..... |
| For more information, click here |
Space multi-junction solar cells- Measurement and calibration procedures (ISO NWI 14N458) (ISO) Posted on 2006/11/2Updated on 2006/11/2
|
Working group:ISO TC20/SC14/WG1 GT574
Document number: ISO NWI 14N458
Scope :
This international standard specifies calibration procedures for multi-junction space solar cells and their constituent sub-cells. These referenc..... |
| For more information, click here |
Space Environment (Natural and Artificial) — Model of the Earth s magnetospheric (ISO CDC 22009) (ISO) Posted on 2006/11/2
|
Working group:ISO TC20/SC14/WG4 GT570
Document number: ISO CDC 22009
Scope :
Standard describes the main magnetospheric large-scale current systems and the magnetic field in the Earth's
magnetosphere..... |
| For more information, click here |
Identification des objets par RFID: (AFNOR) Posted on 2006/10/10Updated on 2006/10/31
|
Working group:ISO/IEC JTC1 SC 31
Scope :
Identification de produits d’un bout à l’autre de la chaîne logistique, meilleure traçabilité, gestion d’information et localisation en temps réel sont quelques applications de..... |
| For more information, click here |
Model Driven System Design (INCOSE) Posted on 2006/06/9Updated on 2006/10/31
|
The charter of this WG is to characterize model driven system design and identify transition strategies from present document driven approaches.
Current Projects :
• AP233 :
Complete AP233 and engage..... |
| For more information, click here |
Tools Database (INCOSE) Posted on 2006/06/9Updated on 2006/10/31
|
Charter :
Deliver and maintain a database of Commercial-Off-the-Shelf (COTS) and Government-Off-the-Shelf (GOTS) tools of interest to Systems Engineers.
Members of the TDWG meet twice yearly - at the Internation..... |
| For more information, click here |
SE Handbook Working Group (INCOSE) Posted on 2006/06/9Updated on 2006/10/31
|
Charter:
This group is chartered to establish version 3 of the INCOSE SE Handbook to improve organization and better represent the breadth of SE knowledge, specifically expanding beyond the existing military/aerospace and US focus.
|
| For more information, click here |
Systems Architecture Working Group (INCOSE) Posted on 2006/06/9Updated on 2006/10/31
|
Charter:
Determine processes, methods, and enabling technologies to develop practical systems architectures that will satisfy user needs.
Current Projects:
• Baselining of Architecture Process..... |
| For more information, click here |
Requirements Working Group (INCOSE) Posted on 2006/06/9Updated on 2006/10/31
|
Charter:
The vision of the RWG is to be the acknowledged leader in advancing the state of the theory, education, and practices of requirements engineering and management in the systems engineering community.
The mission of R..... |
| For more information, click here |
Risk Management Working Group (INCOSE) Posted on 2006/06/9Updated on 2006/10/31
|
Charter:
Identify risk management tools and methods; plan activities to expand knowledge; share information; and interface with related functions.
Current Projects
• Strategic Checklists
|
| For more information, click here |
Aerospace - Fire resistant hydraulic fluids (ISO) Posted on 2006/10/13
|
Working group: ISO/TC20/SC10/WG 8
Document number:ISO 9940
Scope :This specification
a) defines technical requirements, qualification and quality control conditions (product qualification, batch control, accep..... |
| For more information, click here |
Hydraulic transmission- Parts & equipment- Expression of (ISO) Posted on 2006/10/13
|
Working group: ISO/TC20/SC/WG8
Document number:---
Introduction :
The reliability of hydraulic fluid power systems depends largely on the quantity and size of the particles conveyed by the fluid.
The cleanliness of th..... |
| For more information, click here |
Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials (BNAE) Posted on 2006/10/13
|
Working group:BNAE / WG 429 - "Welding and Barzing"
Document number:NF L 06-380-24
Scope :
This standard defines degrees of weldability and brazeability for materials or families of materials used in the aerospace i..... |
| For more information, click here |
Non-destructive testing of welds -- Ultrasonic testing -- Characterization of indications in welds (ISO) Posted on 2006/10/13
|
Working group:ISO/TC44/SC5
Document number:ISO/FDIS 23279
Scope :-
Project Launching Date: 2006-08-11
Publication Date: -..... |
| For more information, click here |
itanium pipes and tubes -- Non-destructive testing -- Part 2: Ultrasonic examination (ISO) Posted on 2006/10/13
|
Working group:ISO/TC79/SC11
Document number:ISO/CD 25902-2
Scope :-
Project Launching Date: 2006-06-30
Publication Date: -..... |
| For more information, click here |
Titanium pipes and tubes -- Non-destructive testing -- Part 1: Eddy current examination (ISO) Posted on 2006/10/13
|
Working group:ISO/TC79/SC11
Document number:ISO/CD 25902-1
Scope :-
Project Launching Date: 2006-06-30
Publication Date: -..... |
| For more information, click here |
Titanium and titanium alloys -- Determination of oxygen -- Infrared method after fusion under inert gas (ISO) Posted on 2006/10/13
|
Working group:ISO/TC79/SC11
Document number:ISO/DIS 22963
Scope :-
Project Launching Date: 2006-09-01
Publication Date: -..... |
| For more information, click here |
Titanium and titanium alloys -- Determination of iron -- Inductively coupled plasma atomic emission spectrometry (ISO) Posted on 2006/10/13
|
Working group:ISO/TC79/SC11
Document number:ISO/DIS 22962
Scope :-
Project Launching Date: 2006-09-01
Publication Date: -..... |
| For more information, click here |
Titanium and titanium alloys -- Determination of iron -- Atomic absorption spectrometry (ISO) Posted on 2006/10/13
|
Working group:ISO/TC79/SC11
Document number:ISO/DIS 22961
Scope :-
Project Launching Date: 2006-09-01
Publication Date: -..... |
| For more information, click here |
Titanium and titanium alloys -- Determination of iron -- Molecular absorption spectrometry using 1, 10-phenanthroline (ISO) Posted on 2006/10/13
|
Working group:ISO/TC79/SC11
Document number: ISO/DIS 22960
Scope :-
Project Launching Date: 2006-09-01
Publication Date: -..... |
| For more information, click here |
Resistance welding -- Fatigue test of resistance welded thin sheet metal structures (ISO) Posted on 2006/10/13
|
Working group:ISO/TC44/SC6
Document number: ISO/CD 18592
Scope :-
Project Launching Date: 2006-09-18
Publication Date: -..... |
| For more information, click here |
Resistance welding -- Vocabulary -- Part 1: Spot, projection and seam welding (ISO) Posted on 2006/10/13
|
Working group:ISO/TC44/SC6
Document number: ISO/CD 17677-1
Scope : -
Project Launching Date: 2006-09-18
Publication Date: -..... |
| For more information, click here |
Programme management — Quality assurance requirements (ISO CDV 27025) (ISO) Posted on 2006/10/6Updated on 2006/10/6
|
Working group: ISO TC20/SC14 WG5 GT571
Document number: ISO CDV 27025
Scope :This International Standard defines the quality assurance (QA) requirements for the establishment and implementation of QA programmes for projects covering mis..... |
| For more information, click here |
Programme Management - Glossary of terms (ISO NWI 450) (ISO) Posted on 2006/10/6Updated on 2006/10/6
|
Working group: ISO TC20/SC14 WG5 GT571
Document number: NWI 450
Scope :
This document controls the definition of all common terms used in the European Cooperation for Space Standardization (ECSS) Standards System. Terms specific t..... |
| For more information, click here |
Programme Management- Material, mechanical parts and processes (ISO NWI 448) (ISO) Posted on 2006/10/6Updated on 2006/10/6
|
Working group: ISO TC20/SC14 WG5 GT571
Document number: NWI 448
Scope:
The purpose of this Standard is to define the requirements and statements applicable to materials, mechanical parts and processes to satisfy the mission performance r..... |
| For more information, click here |
Information and documentation management (ISO NWI N438) (ISO) Posted on 2006/09/22Updated on 2006/10/6
|
Working group: ISO TC20/SC14/WG5 GT571
Document number: ISO NWI N438
Scope:
The purpose of the standard is to define the principles and requirements to be observed during the management of project information (including documenta..... |
| For more information, click here |
Lunar dust simulants (ISO NWI N430) (ISO) Posted on 2006/09/22Updated on 2006/10/5
|
Working group: ISO TC20/SC14/WG4 GT570
Document number: ISO NWI N430
Scope:Standardize the terminology, physical, electromechanical and chemical characteristics and properties of lunar dust simulants of various grades or qualities.
|
| For more information, click here |
Structural components and assemblies (ISO NWI N436) (ISO) Posted on 2006/09/22Updated on 2006/10/5
|
Working group: ISO TC20/SC14/WG1 GT574
Document number: ISO NWI N436
Scope:
This NWI will establish a general standard for the design, analysis, material selection and characterization, fabrication, test, and inspection of all str..... |
| For more information, click here |
General requirements of electrical and electronics (ISO NWI N440) (ISO) Posted on 2006/09/22Updated on 2006/10/5
|
Working group: ISO TC20/SC14/WG1 GT574
Document number: ISO NWI N440
Scope:
This standard establishes the basic rules and general principles applicable to the electrical, electronic, and electromagnetic, microwave and optical eng..... |
| For more information, click here |
Bellows – Design and operation (NWI N434) (ISO) Posted on 2006/08/30Updated on 2006/09/22
|
Working group: ISO TC20/SC14 WG1/GT574 Engineering
Document number: NWI N434
Scope:
This International Standard, based on general space experience and practice,specifies general and detailed requirements for bellows used in unmann..... |
| For more information, click here |
Perfluoroether Elastomer (AMS 7254) (SAE) Posted on 2006/08/30Updated on 2006/09/14
|
Working Group: Ams-Ce Elastomers Committee
Document number: AMS 7254
Scope:
This specification covers a perfluoroether elastomer in the form of molded rings.
These rings have been used typically as static sealing rings and m..... |
| For more information, click here |
Fluorocarbon Rubber (FKM), High Temperature/HTS Oil Resistant/Fuel Resistant, Low Compression Set, 70 to 80 Hardness, Low Temperature Tg -22°F (-30°C) (SAE) Posted on 2006/08/30Updated on 2006/09/14
|
Working Group: Ams-Ce Elastomers Committee
Document number:CE05AB
Scope:
This specification covers a fluorocarbon (FKM) rubber in the form of O-rings, compression seals, O-ring cord, and molded-in place gaskets.Application: These..... |
| For more information, click here |
Welding in aerospace - Qualification test of welders and welding (ISO) Posted on 2006/06/8Updated on 2006/09/14
|
Working Group: ISO/TC44/WG4:Welding and brazing in aerospace
Document number: 24 394
Scope:
This International Standard applies to the qualification test of welders and welding operators for welding metallic mat..... |
| For more information, click here |
Rubber, Fluorocarbon (FKM) Elastomer, Glass Transition, Tg, -40F 70 to 80 (SAE) Posted on 2006/08/30Updated on 2006/09/14
|
Working Group: Ams-Ce Elastomers Committee
Document Number:CE05AC
Scope:
Material has resistance to a variety of turbine engine oils, including high temperature stabilized, "HTS" oils, hydrocarbon based fluids such as fuels and hydrauli..... |
| For more information, click here |
Welding - Friction stir welding of aluminium - General Requirements (ISO) Posted on 2006/06/14Updated on 2006/09/14
|
Working Group: ISO/TC44/SC10
Scope:
Welding processes are widely used in fabrication of engineered structures. During the second half of the twentieth century, welding of large structures was dominated by fusion welding processes wherein fusio..... |
| For more information, click here |
Reliability, Maintainability, Supportability, and Logistics (SAE) Posted on 2006/07/18
|
The G-11 Division for Reliability, Maintainability, Supportability, and Logistics provides an industry/government forum to review RMS technology and investigates the interfaces with logistics support, engineering design and development, support cos..... |
| For more information, click here |
Modelization benefits to RAMS of software (IMdR-SdF) Posted on 2006/07/18
|
| Complexity of software architecture and software operations induce more and more to search for a modelization of operations in the upstream development cycle. On the objectives of modelization basis and ultimately of the activities sector, different metho..... |
| For more information, click here |
dictionary of quality terms (IAQG) Posted on 2006/07/11
|
Human Factors programmes require communication elements including a good understanding of terminology.
An aerospace terminology glossary or dictionary of quality terms used by the IAQG will be progressively developed...... |
| For more information, click here |
Hand Held Fire Extinguisher Hidden Fire Test (FAA) Posted on 2006/06/14
|
Appendix 1: Hand Held Fire Extinguisher Hidden Fire Test
DRAFT
PURPOSE
The purpose of this test is to evaluate the effectiveness of candidate replacement hand held streaming agents in a flooding situation. Halon 1211, a streaming agent, ..... |
| For more information, click here |
DIRECTIVES ON WEEE AND ROSH (ASD) Posted on 2006/06/14
|
| The attached documents present the position of the AeroSpace and Defence Industries Association (ASD) regarding two items of EU legislation dealing with environmental aspects of electrical and electronic equipment. They discusses the scope of these direct..... |
| For more information, click here |
RoHS and WEEE Directives - Expert Tip / Opinion (BSI) Posted on 2006/06/14
|
| As a service to BSI Medical Device Manufacturing clients, BSI is providing the opportunity to consultants working in the medical device regulatory / quality field to provide ‘Tips / Opinions’ that are relevant, topical and of general interest to medical d..... |
| For more information, click here |
Technical specification of plating of connectors (BNAE) Posted on 2006/06/14
|
| The aim of this technical report is to describe test methods, requirements and schedule to validate the alternative plating and treatment for connectors and accessories in order to comply with DIRECTIVE 2002/95/EC OF EUROPEAN PARLEMENT AND OF THE COUNCIL ..... |
| For more information, click here |
New fire extinguisher material may replace existing Halon systems (SAE) Posted on 2006/06/14
|
| A new fire extinguisher material was developed to replace the internationally banned Halon 1301. While remaining environmentally safe, the new fire extinguisher outperforms Halon 1301 and is less expensive. The discovery was made by a research team under ..... |
| For more information, click here |
Shot Peening, Automatic (AMS 2430) (SAE) Posted on 2006/06/14
|
This specification covers the engineering requirements for automatic peening surfaces of parts by impingement of metallic shot, glass beads, and ceramic shot.
To induce residual compressive stress in surface layers of parts, thereby increasin..... |
| For more information, click here |
Handheld fire extinguishers with synthesis gases, for aircraft use (BNAE) Posted on 2006/06/14
|
| This standard specifies the technical requirements and qualification conditions for handheld fire extinguishers using synthesis gases for aircraft use, designed for use in the cockpit, in the passenger cabin and to protect areas accessible to the crew...... |
| For more information, click here |
Specification for FSW of Aluminium alloys for aerospace applications (D17.3) (AWS) Posted on 2006/06/14
|
| This specification contains requirements for the friction stir welding of aluminum aerospace hardware. It is to be used in conjunction with the Engineering Authority’s design handbooks or their accepted data...... |
| For more information, click here |
